"instax SHARE" is FUJIFILM official application that can be used to print images from smartphones to instax SHARE smartphone printer.
[Select Your Best Shot!]
"instax SHARE" is an app to print images from your smartphone with the smartphone printer instax SHARE SP-1/SP-2/SP-3(FUJIFILM). You can enjoy beautiful instax print by simply selecting best shots in your smartphone or tablet within less than a minute.
[Supported Printer]
FUJIFILM instax SHARE Smartphone Printer SP-1/SP-2/SP-3
* Not support to old model printers.
[Supported Smartphones]
Android 4.0.3 or later
*With regard to customers who use Android ver. 6.0.x or later, there is a case that the connection between the smartphone and the printer does not work if GPS function is OFF. For the customer corresponding to this phenomenon, please turn on the GPS function when you use instax SHARE.
CAUTION: SETTINGS
If you are using Android 6.0 or later and cannot connect to the printer, check the following settings.
(1) GPS Settings
It is sometimes not possible to connect to the printer when the GPS function of your Android device is turned off.Follow the steps below to turn your GPS function on.
Example: Nexus7 (Android 6.0.1)
(1) Tap "Setting".
(2) Tap "Location".
(3) If "Position Information" is off, turn it on.
(4) Try connecting to the printer.
(5) If communication is still not possible after performing steps (1) to (3), turn the position information setting in (3) off and back on again, then try connecting to the printer again.
(2) Authority settings in the "instax SHARE" app
Some or all of the functions of the "instax SHARE" app cannot be used unless the following authority settings are enabled for the app.
Please follow the steps below to enable these authority settings. We apologize for the inconvenience.
Example: Nexus7 (Android 6.0.1)
(1) Tap "Setting"
(2) Tap "Apps"
(3) Tap "instax SHARE"
(4) Tap "Permission"
(5) Enable "Camera", "Storage" and "Location".
[How to print]
Print photos taken with smartphones.
1. Turn on the printer.
2. Launch the instax SHARE app.
3. Select image from Photos or SNS, or take photo with a smartphone camera.
4. Once image is selected, press Edit and edit the image (scaling, rotate, filter and template).
5. Post message on a template if template which accepts text is selected.
6. Press "Connect and print." when editting is completed.
7. When you print for the first time, will be asked password for the printer, please enter initial password that is wrote in User's Guide of the printer.
"Instax SHARE" adalah aplikasi resmi FUJIFILM yang dapat digunakan untuk mencetak gambar dari smartphone ke printer smartphone SAHAM instax.
[Pilih Best Shot Anda!]
"Instax SHARE" adalah sebuah aplikasi untuk mencetak gambar dari smartphone Anda dengan smartphone instax printer SHARE SP-1 / SP-2 / SP-3 (FUJIFILM). Anda dapat menikmati cetak instax indah dengan hanya memilih foto terbaik di smartphone atau tablet dalam waktu kurang dari satu menit.
[Yang didukung Printer]
FUJIFILM instax SHARE Smartphone Printer SP-1 / SP-2 / SP-3
* Tidak mendukung untuk printer model lama.
[Didukung Smartphone]
Android 4.0.3 atau yang lebih baru
* Sehubungan dengan pelanggan yang menggunakan ver Android. 6.0.x atau lambat, ada kasus bahwa hubungan antara smartphone dan printer tidak bekerja jika fungsi GPS MATI. Untuk pelanggan yang sesuai dengan fenomena ini, silakan mengaktifkan fungsi GPS bila Anda menggunakan instax SAHAM.
PERHATIAN: PENGATURAN
Jika Anda menggunakan Android 6.0 atau yang lebih baru dan tidak dapat terhubung ke printer, periksa pengaturan berikut.
(1) GPS Pengaturan
Hal ini kadang-kadang tidak mungkin untuk menghubungkan ke printer ketika fungsi GPS dari perangkat Android Anda diaktifkan off.Follow langkah-langkah berikut untuk mengubah fungsi GPS Anda.
Contoh: Casing Nexus7 (Android 6.0.1)
(1) Tekan "Setting".
(2) Tekan "Location".
(3) Jika "Posisi Information" mati, hidupkan.
(4) Cobalah menghubungkan ke printer.
(5) Jika komunikasi masih tidak mungkin setelah melakukan langkah-langkah (1) ke (3), mengubah informasi posisi pengaturan dalam (3) off dan kembali lagi, kemudian mencoba menghubungkan ke printer lagi.
(2) pengaturan Otoritas di "instax SHARE" app
Beberapa atau semua fungsi dari "instax SHARE" aplikasi tidak dapat digunakan kecuali pengaturan otoritas berikut diaktifkan untuk aplikasi.
Ikuti langkah-langkah di bawah ini untuk mengaktifkan pengaturan otoritas tersebut. Kami minta maaf atas ketidaknyamanannya.
Contoh: Casing Nexus7 (Android 6.0.1)
(1) Tekan "Setting"
(2) Tekan "Apps"
(3) Tekan "instax SHARE"
(4) Tekan "Izin"
(5) Aktifkan "Kamera", "Storage" dan "Location".
[Cara mencetak]
Mencetak foto yang diambil dengan smartphone.
1. Hidupkan printer.
2. Luncurkan aplikasi instax SAHAM.
3. Pilih gambar dari Foto atau SNS, atau mengambil foto dengan kamera smartphone.
4. Setelah gambar dipilih, tekan Edit dan edit gambar (scaling, memutar, filter dan template).
5. pesan Post pada template jika template yang yang menerima teks dipilih.
6. Tekan "Connect dan cetak." ketika editting selesai.
7. Ketika Anda mencetak untuk pertama kalinya, akan diminta password untuk printer, masukkan password awal yang menulis dalam Panduan Pengguna printer.